Need for Reducing the IV Extension Lines During Administration Requiring Pressure

Advanced technologies today has provided the medical professionals with some of the medical practices that are serving as the most valuable tools of diagnosis of certain conditions and states. Some of these procedures that are provided by the medical professionals generally require administration of fluids over a short period of time, that in turn will help in increasing the pressure being extended and utilized on devices such as the IV Extension Lines.

The pressure that is being produced during these procedures will increase the pressure level that is again exerted on the devices like iv extension, and this in turn will lead to rupturing of the convectional extension Lines. Failure of this iv extension during administration can lead to serious complications of the patient. Although the FDA has issued enough warnings, reminders and recommendations to help the health care facilities reducing events. Medical devices manufacturers to this have developed pressure rated vascular access devices, and still failure of iv extension continue to occur.

The Recommendations of the FDA

FDA when it comes to the IV Extension Lines have received hundreds of adverse reports, when it comes to the vascular access devices that requires pressure during the process and promoting them to issue warnings to use these equipment’s in a right manner especially during the procedures. And in order to prevent the rupture of the vascular devices, FDA to this has provided various recommendations that include the following.

1. Do make sure that you check on the label of various vascular devices in order to know the pressure and the flow rate. And Incase there is nothing being provided then assume that the device is not right and cannot be used for this application. 

2.  Ensure that the pressure attained during the entire procedure does not exceed its maximum level for its vascular excess devices.

3.Do make sure that you are aware of the various pressure that is required for many factors like the flow rate, tube diameter, fluid viscosity and the last but not the least the length.

The solution for the innovative pressure rated IV Extension Lines Manufacturer in the health industry:

The only solution to this problem is the universal extension Lines that can be utilised both for the standard procedures as well as the procedures that require pressure. And though there are small pressures that are being exerted on the IV Extension Lines, the prohibitive costs makes the entire process unfeasible that can be used for every iv procedure, necessitating the change whenever the pressure rates devices are required.

To conclude making use of one universal iv extension Lines throughout the treatment or process, will help in decreasing vascular access devices failures during those procedures that require pressure during treatments.This will again help you in reducing discomfort and complications in the patient that can arise during these procedures. So what would you like to say about the blog post above? Do leave your thoughts in the section given below.